The use of laser engraving and laser cutting machine, the process is very simple, as the use of computers and printers print on paper. You can use a variety of circumstances Win98/Win2000/WinXP graphics software such as CorelDraw, such as design, scan the graphics, vector-based graphic and a variety of CAD files can be easily "print" to the carving machine. The only difference is that the print will be coated toner to the paper, and laser engraving machine is to reach laser wood products, Senanayake tablets, plastic plates, metal plates, stone materials, and so almost all of the above.

     Laser carving sculpture by the way can be divided into different lattice vector cutting and carving: Carving like high-resolution array of dot-matrix printer. Laser first swing around, each carving out a series of points from the line, and then move up and down at the same time the first laser carving out a number of lines, constitute the final full-page image or text. Scan graphics, text and vector graphic dot-matrix-hour access to sculpture. Vector cutting and engraving dot-matrix, vector graphic cut in the outer contour line to carry out. We usually use this model in wood, Senanayake tablets, paper, and so on through cutting material can also be carried out in a variety of materials on the surface marking operation.

     A laser engraving machine performance, mainly by the speed of engraving, sculpture and facula strength of the size of the decision. Engraving refers to the speed of the laser is the first mobile speed, usually with IPS (inches / s) that bring high-speed high-productivity . Also used to control the speed of the depth of cut for specific laser intensity, the slower the speed, cutting or engraving of the greater depth. You can adjust the speed of engraving machine panel may also make use of the computer's printer driver to adjust. 1% to 100%, 1% adjustment. Strength refers to the sculpture reach the surface of the material in the laser intensity. The sculpture of a specific speed, the greater the intensity, cutting or engraving of the greater depth. You can use laser engraving machine panel strength conditioning may also make use of the computer's printer driver to adjust. 1% to 100%, 1% adjustment. The greater intensity, which is equivalent to the greater speed. The depth of cut is also deeper. Spot size can make use of different focal length lens adjusted. Small spot of high-resolution lens for the sculpture. Great spot for the low-resolution lens of the sculpture, but Vector cutting, it is the best option.

     General laser carving machine Engraving to the following materials: wood, plexiglass, metal plates, glass, stone, crystal, Corian, paper, two-color plates, aluminum, leather, resin, metal spray