Customers should be based on business needs and financial situation, choose the right type of engraving machine the size and power. General smallthe engraving machine is 600 mm × 600mm and 600 mm × 900mm, width of the feed is 700 mm. Carving is a small two-color plate engraving machine the most basic application, the admissibility of good. To the small engraving machine with the price of almost, but two-color sculpture at the plate to the Conference Board, relatively trouble and cause unnecessary waste. Large-scale sculptures of a 1200 mm × 1200mm, 200mm × 1500mm, 1500mm × 2400mm, 2400mm × 3000mm, the above models into the Bureau of Engraving width of more than 1350 mm, is now available in the market of PVC and perspex panels are the size of 1300 mm × 2400mm, so it needs several models of large format engraving machine customers more appropriate.

Second, the spindle motor

Spindle motor computer engraving machine is an important component parts, the performance of computer engraving machine the performance of a crucial impact. Processing spindle is usually divided into two categories: precision machining and spindle power cut off spindle.

1, fine processing of the main characteristics of a low noise, high-speed, height, especially suitable for processing fine workpiece, such as seals, nameplate, Xiongpai gifts. Such as high-speed motor usually frequency electrical power a smaller, 250 W as in the following. Shortcomings of the material is cut off the thick of the less well off, not cut off the thicker material.

2, the main power cut off, mainly for the cut, carved high-power, is characterized by power and great cutting ability, especially for cut-and third three-dimensional character, of course, can create Xiongpai, nameplate, such as seals. According to such high-power spindle motor characteristics can be divided into general exchange of high-frequency brushless motor and a brush AC motor, the main difference is: A, high-speed brushless motor frequency, variable speed range of 70060000 to / minutes, while a general Brush AC motor is not super-maximum speed to 24,000 / minutes: B, brushless motor rotation frequency of high precision, wear small, low noise, make noise are significantly lower than the brush AC motor; C, brushless motor block to the frequency of good, because Converter on the special circuit current limit, short of burning motor will not stall, while brush in exchange for blocking or overload operation to smoke when burned very quickly and do not repairable; D, brushless motor inverter Frequency control technology used Speed is a professional-grade products, long life, manufacturers provide free Baohuan one year later can also replace the high-speed motor bearing on the maintenance, exchange and a brush because of the use of electric motors Zarqawi life about 300 hours In the replacement of brushless motors or motor, brushless AC motor is not normally a day warranty.

Èý. Control and speed of choice: control now can be divided into three types:

A, all the computing work is computer-controlled completed, engraving machine at work at a computer work, and the layout can not be carried out other work, such computers may be solid waste caused by the misuse.
B, using SCM control, this controller can work in the carving of the layout at the same time, but we can not shut down your computer, which in fact equivalent to savings of 7 on a computer, the computer and reduce the waste caused by misuse .
C, a USB port transmission of data, the system has more than 32 M memory capacity. As long as the preservation of files, you can now completely detached from the computer, shut down your computer or other typesetting. This has greatly enhanced the efficiency of the work of engraving machine.

4, rails

Large Format engraving machine to widen the use of imported square rails, the load capacity and ability to maintain the accuracy of the circular track 30 times more to ensure the high quality and high-speed engraving machine.

5, precision

Small plane Chinese characters carved 1 mm, or large format engraving machine carved Koaza 1.5 mm, under the magnifying glass to see very clear.