Principles
YAG laser machine is a solid laser machine with infrared light whose wavelength of frequency band is 1064nm.It uses krypton lamp as energy source (driving source).As a medium for producing laser, Nd:YAG can send out special wavelength to let effective substance's level of energy jump higher so that it can let off laser. After the energy of laser is strengthened it will form a laser beam to process the material. The path of the laser beam will be changed through the resonance mirror controlled by computer so as to accomplish automatic marking.
Product features
High laser output power and can be controlled by electricity current, software etc.
Can mark characters or graphics with any depth that is less than 0.3mm.
Galvonmirror scanning system is installed, high speed, high accuracy and stable.
Robust software system:Fine marking lines; 1/4 of the diameter of one piece of human hair.
Low in process cost, no need for inks or printing consuming materials.
Product application
ZT-YAG-50A laser marking machine , the use of low-cost, low prices, mainly for metal, alloy and oxide, ABS, epoxy resin, printing ink, etc. Also it’s widely used in the industries such as electron components, electric appliance, jewels, glasses, hardware, car components, communication products, plastic keystroke and IC.
Technical parameters
| Max. laser power |
50W |
| Laser wave-length |
1064 μm |
| Beam quality M2 |
≤10 |
| Repetition frequency |
≤ 30khz |
| Standard marking area |
100mmx100mm |
| Marking depth |
≤0.30mm/0.40mm |
| Linear speed |
≤7000mm / s |
| Min. line width |
0.02mm ~ 0.04mm |
| Min. character size |
0.3mm ~ 0.4mm |
| Repetition accuracy |
± 0.003mm |
| Power consumed |
≤5KW |
| Marking area option |
50mmx50mm/150mmx150mm/300mmx300mm |
System components :
optical path, cold water storage tanks, control cabinet, monitors, workstations, foreign air-conditioning, optional rotary table
Software : Support WIN98/WIN2000/WINXP
Supplies :krypton lamps, filter, water, electricity
Installation Environment :It occupies an area of 10 square meters and should by put steadily.
Working environment : smoothly in a clean environment without vibrating or dirt in the air because the dirt will make the mirror dirty and reduce its lift sharply.
Temperature of the environment: 25¡æ¨D28¡æ
Humidity of the environment: 5% to 75% (no condensation)
Power supply: 220VAC ±5% 50HZalternating current capacity, it should be more than 5KW, has null line and separate earth wire which should be connected with the earth well. The circuit breaker should be set specially for the machine (C32) and it should equip with electric leaking protecting device.
