Introduction of Laser Engraving
The use of laser engraving and cutting, the process is very simple, as the use of computers and printers print on paper. You can use a variety of circumstances Win98/Win2000/WinXP graphics processing software, such as CorelDraw, such as design, scanned graphics, vector graphic and a variety of CAD files can be easily "Print" to the engraving machine. The only difference is that print will be coated toner to the paper, and laser engraving is to reach laser wooden products, yaak tablets, plastic sheeting, metal plates, stone, etc. Almost all the material on.
* Lattice lattice sculpture carved like high-resolution dot matrix printing. Laser head swinging around, each carving out a series of points of a line, and then moved up and down the laser head at the same time carving out a number of lines, constitute the final full-page image or text. Scanned graphics, text and vector graphic dot matrix engraving may be used.
* Vector cutting and carving different lattice, vector cut in the outer contour Graphic online. We usually use this model in wood, yaak tablets, paper and other materials to penetrate the cut, in a variety of materials can also be marking the surface of the operation.
* Carving speed: carving speed refers to the first mobile laser speed, usually with IPS (inches / sec) that bring high-speed production efficiency. Cutting speed is used to control the depth of the laser intensity for a particular, more slowly, cutting or carving the greater depth. You can adjust the speed of engraving machine panel may also make use of the computer's printer driver to adjust. 1% to 100% of the range of adjustment is 1%. Hummer drive advanced motion control system allows you to high-speed carving still be ultra-fine quality carving
* Carving strength: carving intensity refers to the materials reach the surface of the laser intensity. Sculpture for a particular speed, the greater the intensity, cutting or carving the greater depth. You can adjust the strength engraving machine panel may also make use of the computer's printer driver to adjust. 1% to 100% of the range of adjustment is 1%. The greater the intensity, the equivalent of the greater speed. Depth of cut deeper
* Facula Size: spot size laser beam can make use of different focal lengths to adjust the lens. Small spot of the lens for high-resolution carving. Great spot for a low-resolution lens of sculpture, but for vector cutting, it is the best option. New equipment standard configuration of the lens is 2.0 inches. Its spot size in the middle for various occasions.
* Can be carved materials: wood, plexiglass, metal plates, glass, stone, crystal, Corian, paper, two-color plates, aluminum oxide, leather, resin, metal spray.
