Suitable for laser cutting of material
Suitable for laser cutting of metal:

1, stainless steel:
Laser cutting easier to cut stainless steel sheet. Using high-power YAG laser cutting system, cutting the maximum thickness of the stainless steel has been up to 4mm. We have developed low-power YAG laser cutting system can cut stainless steel thickness 4mm.

2, alloy steel:
Most of all alloy steel laser cutting, cutting-edge sound quality. But with the high-tungsten tool steel and hot steel mold, laser cutting and ablation will be sticky residue.

3, carbon steel:
Modern laser cutting system can cut carbon steel plate close to the maximum thickness of 20mm, on the thin kerf may narrow to about 0.1mm. Laser cutting of its low-carbon steel heat affected zone is extremely small, and cut every formation, smooth, good verticality. High-carbon steel, laser cutting edge quality in low-carbon steel, but the large heat-affected zone. I AHL's largest series of laser cutting machine depth 5mm.

4, and aluminum alloy:
Cutting belong to melt aluminum cutting, to be supplemented by gas-cutting area of melt blown away, get a better quality of the section. At present, cutting the maximum thickness of the aluminum sheet for 1.5mm.

5, and other metal materials:
Copper is not suitable for laser cutting, cutting the thin. Titanium and titanium alloys, nickel alloys can be used in most laser cutting.

6, non-metallic materials:
Laser cutting can be plastic (polymer), rubber, wood, paper products, leather, as well as natural and synthetic fabrics such as organic materials; at the same time be able to cut quartz, ceramics, and other inorganic materials, but also cutting a new type of light to strengthen the fiber composite materials such as polymers .